CPeT-IT update history:

Changes in 1.6.5.31 12/04/2010
[*] Fixed a bug in text file import where other column was not imported in many cases

Changes in 1.6.5.30 09/04/2010
[+] Added option to classify soils using SBTn or Ic (affects classification as cohesive or non-cohesive)
[+] Added a simple filter to correct depth values due to tilt (requires tilt data in Other column)
[+] Added project parameter to control the number of decimal digits in tabular results
[+] Added new option to automatically estimate OCR number
[+] Added option to define start page number when printing overall report
[*] Fixed a small bug in Export All CPT's command
[*] Baseline shift values are now stored and can have negative value
[*] Fixed a small bug in layer statistics report where minimum characteristic column displayed mean values
[-] Redesigned overlay report dialog

Changes in 1.6.4.14 25/01/2010
[+] Added Su calculation based on automatic Nkt estimation proposed by Robertson
[+] Added feature to direct edit raw input data from within tabular results grid
[+] Added kh calculation inside dissipation interpretation module (based on Robertson 2010)
[+] Added new custom export to XLS files command
[-] Updated dissipation interpretation module
[*] Fixed a bug with main menu where an error occurred when hovering over the Project menu command

Changes in 1.6.4.1 07/01/2010
[+] Added a simple filter to shift raw data
[+] Added overall report option in section statistics layers dialog
[+] Added support for multiple selection of CPT files in File Manager
[-] New SBT plot available based on Robertson (2010)
[*] Fixed a bug where incorect title was shown in estimated SPT plot
[*] Fixed a bug in automatic layer detection (associated with auto include last point)

Changes in 1.6.2.20 15/12/2009
[+] In place editing of layer depth inside Layers list
[+] Added module to easily create geotechnical section
[+] Added module to calculate statistics for individual soil layers
[+] Added option to choose between N(60) and N1(60) calculation in CPT properties
[-] Typical geotechnical sections are now recalculated automatically every time a calculation parameter changes
[-] Points that do not meet SBTn criteria are excluded from arithmetic average calculation
[-] The software will store and remember import data directories

Changes in 1.6.1.18 20/11/2009
[+] Added option to define non-hydraulic pore pressures
[+] Added command to copy data from Basic resutls and Estimated parameters by right clicking on the tabular results
[+] Added command to export basic and estimations results to XLS file for all selected CPT files
[-] Apply all button in CPT properies will now popup a dialog with available options to apply
[*] Fixed a bug with network license
[*] Fixed some minor bugs in dissipation module

Changes in 1.6.0.97 21/09/2009
[*] Fixed a small bug regarding inverted SBT plot when creating a new project

Changes in 1.6.0.96 11/09/2009
[+] Added option to display data vs penetration depth or elevation
[+] When adding a layer in typical section module description and color is auto assigned according to SBTn
[*] Fixed a bug in typical section module where "&" character was not displayed correctly
[*] Fixed a bug in typical section module regarding soil layers appearance in report
[*] Fixed a bug in pile module report (load vs stress page displayed a wrong header)
[*] Fixed a bug in user estimations where value of Ksbt was lost
[*] Fixed a bug in Ic plots where in some cases zero values where displayed
[-] Apply all button in CPT properties will not alter elevation and GWT to other CPT files
[-] Updated user's manual

Changes in 1.6.0.84 21/07/2009
[+] Added option to define custom soil unit weight from CPT properties dialog
[+] Added option to copy and paste custom estimation data between CPT files (or from an external spreadsheet application)
[-] New unit weight formula based on qt and Rf
[-] Redesigned typical section report
[-] Redisigned control to browse for input files
[*] Fixed a bug in Bq calculation where the original values was always used (instead of the averaged value)
[*] Fixed a bug in pipe pile bearing calculation

Changes in 1.6.0.68 19/03/2009
[+] Added option to display custom estimations data over the estimations plots
[+] Added overall partial sums of primary and secondary settlements (settlements module report)
[*] Fixed a bug where some report pages could not be displayed
[*] Fixed a bug in the transition layer report not displaying statistics on the first page
[-] New way to prepare reports by selecting pages to be included (or excluded)
[-] Updated user's manual

Changes in 1.6.0.56 18/02/2009
[+] Added transition layer detection algorithm
[+] Added transition layer detection report
[-] Updated equation for the estimation of Ksbt
[*] Fixed a bug in XLS import where the software always used 2 decimal digits for reading numbers

Changes in 1.6.0.43 12/12/2008
[+] Added the latest normalization procedure proposed by Dr. Peter Robertson (2008)
[+] Added OCR number customization in CPT properties
[+] Added option to import dissipation data from XLS files
[+] Added simple settlement vs load curve plot in pile bearing capacity module
[+] Added 2 decimal digits float format to several estimated parameters for more accuracy with Imperial units
[+] Added feature to export plots in graphic format by right clicking on them
[*] Fixed a bug in bearing capacity module when working with Imperial units
[*] Fixed a bug in pipe pile bearing capacity
[*] Fixed a bug where CPT items in file manager could not be repositioned by mouse (use ALT key)
[*] Fixed a bug where the automatic update procedure does not replace the old executable
[*] Fixed an issue in Ic plots when Ic value cannot be defined
[-] Updated pile reports
[-] Updated user's manual

Changes in 1.6.0.30 26/09/2008
[+] Added option to check and update the application online
[+] Added new WGS84 coordinates property for creating Google Earth placemarks
[+] Added ability to batch import XLS files from XLS import dialog
[+] Added zoom direction property for current project
[+] Added a simple bearing capacity calculation module
[-] Updated procedure for the calculation of stress normalization for Qtn (based on recent reccomendation by Prof. Peter Robertson)
[-] New CPT file manager
[-] New formulas for the calculation of Constrained modulus M (applicable to all soil types), Go, Es and other soil properties
[-] New settlements calculation module (applicable to all soil types)
[-] Quick preview now displays SBTn plot
[-] Some minor visual enhancments
[*] Fixed a bug when importing XLS files without u2 data available
[*] Fixed a small issue when calling the geotechnical section module
[*] Fixed a bug in the normalized qt plot (holding the SHIFT key the software was pointing in the wrong column in the tabular results)

Changes in 1.5.5.49 04/06/2008
[+] Added CPT coordinates definition (under CPT calculation properties) to be used with the SectionMaker
[+] Added ability to use the current sheet name as the name of the CPT when importing data from XLS files (Auto assign name not checked)
[+] Import dialogs can now be resized
[*] Fixed a bug in Layer Data dialog always showing SI units
[*] Fixed a bug in Geotechnical Section module displaying units next to OCR

Changes in 1.5.5.42 04/06/2008
[+] Added new module for the creation of typical geotechnical sections based on the average CPT estimation results
[+] Added new plot to display the initial and final pore pressures versus depth in dissipation module
[+] Added ability to define a custom value for the final pore pressure value in disspation module
[+] Added feature to change the final pore pressure value in dissipation module by mouse
[+] Added feature to zoom and scroll plots using the mouse
[+] Added feature to merge a CPeT-IT file into an existing project file

Changes in 1.5.5.26 18/04/2008
[*] Fixed the "Failed to set data for" error message when running CPeT-IT under Vista?

Changes in 1.5.5.23 03/04/2008
[+] Added support for network licenses using one USB dongle

Changes in 1.5.5.14 31/03/2008
[+] Added support for floating license using a USB dongle
[+] Added more calculation properties in footing settlements report
[-] Changed colours of SBT plot according to recent recommendations by Prof. Peter Robertson
[*] Fixed a bug in pile module where fp was assigned a wrong value when using Imperial units
[*] Fixed a bug regarding Imperial units conversion when importing data from XLS file

Changes in 1.5.4 11/02/2008
[+] Added support for 2 new units in import dialog
[*] Fixed a bug in estimated parameters Ksbt not showing correctly the units used (only in the table header)

Changes in 1.5.3 10/12/2007
[+] Added feature to import data directly from XLS file
[+] Added calculation of Constrained Modulus, M
[+] Added project information data to overlay report pages
[*] Fixed a bug when an error occured when trying to alter GWT in dissipation module
[-] Apply to all button from CPT properties now recalculates all CPTU files
[-] OK button from CPT properties now recalculates selected CPTU file

Changes in 1.5.2 07/11/2007
[+] Navigation inside a report using the mouse wheel and keyboard keys
[+] Added feature to export plots in various picture formats
[+] Added feature to export report pages as graphics
[+] Added feature to import multiple CPT files
[*] Fixed a bug in reports where the first plot was not shown in the right position
[*] Fixed a bug in Ksbt plot (did not apply left axis custom scale when changing CPT file)

Changes in 1.5 25/09/2007
[+] Added normalized plots tab under Basic results
[+] Added dissipation data module for the graphical interpretation of insitu dissipation test data
[+] Added settlement calculation module
[*] Fixed visualization issues of software running under Windows XP
[*] Several minor fixes
[*] Updated documentation

Changes in 1.4 15/06/2007
[+] Added single pile bearing capacity calculation using LCPC method
[+] CPTU files inside file manager can be moved with the mouse (click & drag)
[+] Apply to all plots when editing a left axis now affects SBT plots
[*] Fixed bug when opening a project and plots did not show correct units in titles
[*] Fixed an AV error when selecting direct print command
[*] Fixed a bug when converting units
[*] Fixed a bug when water level was negative
[*] Fixed a bug in reports not showing correct maximum depth of CPTU file
[*] Updated documentation

Changes in 1.3 11/05/2007
[+] Added feature to create overlay reports for selected (checked) CPTU files
[*] Fixed a bug with zero values in qc, fs and u. The software will interpret these values as HAND AUGERED
[*] Fixed a minor bug when trying to insert dummy rows without first clicking on the data grid

Changes in 1.2.1 02/05/2007
[*] Fixed a bug regarding loading Company Logo picture
[*] Fixed bug where in some cases tabular data where not cleared as they should

Changes in 1.2 01/05/2007
[*] Improved speed in batch report processing

Changes in 1.1 16/04/2007
[+] Updated documentation with technical notes provided by Prof. Peter Robertson
[+] Added page numbers in reports
[+] Added ability to apply scales from selected CPTU to all CPTU files
[*] Fixed an error where in .cor files the cone resistance was assumed corrected (when importing the file)

05/04/2007
[+] First commercial release