By default, when viewing results, all plots use an auto scale feature to fit the data in both vertical and horizontal axes. SPAS 2009 allows you to modify the scale of the axes by setting custom minimum and maximum display values. Changes can be made to every plot the software provides.
Figure 41. An input signal plot
In order to customize the vertical axis just click on it. The following dialog appears:
Custom scale axis dialog
The dialog will display the current axis scaling values, which are set to Automatic by default. You may alter the minimum and maximum values that the axis can display by entering data on the Min value and Max value edit boxes. Entering a custom value in the Desired increment area the plot will try to display a label using this value as a step. For example you may need to display the depth value every one meter so just enter 1.00 into the associated edit box. The Number of minor ticks should be an integer value which denotes the number of minor ticks between two depth increments.
In a same way you can alter the properties for the horizontal axis of each plot.
An input signal plot with customized the left axis